Spring is in the air, and what better way to usher it in than with this rabbits and flowers decoration. This is a great scroll saw project to get comfortable with interior cuts.
Here are the supplies and equipment that you'll need:
- Rabbits and Flowers Template
- 8½" x 6½" wood blank
- Acrylic paint or finish of your choice
- Proxxon Bandsaw MBS/EP
- Proxxon Drill Press TMB 115
- Proxxon Scroll Saw
- MICROMOT Flexishaft 110/BF
- Proxxon Pensander PS 13
Instructions:
- Download and print the Rabbits and Flowers Template. Mount the pattern on the wood blank. Cover one side of the blank with painter's tape. Mist the back side of the pattern with spray adhesive, and mount on the taped blank. The painter's tape made removal of the pattern easy without leaving any sticky residue.
- Cut the exterior lines of the pattern using the bandsaw mounted with the scroll saw band. This band is very narrow and capable of extremely tight cuts. Alternatively, these lines can also be cut using the scroll saw.
- Drill pilot holes for the interior cuts using the bench drill press.
- Thread the scroll saw blade through the pilot holes and cut the interior shapes using the scroll saw.
- Sand any rough edges. The flexishaft mounted with a sanding drum and the pen sander are perfect for sanding the inner edges and tight spots.
- Coat the decoration with your choice of finishes. I used two coats of white gesso, then stippled a coat of sage green acrylic paint.
![]() |
Carole |
No comments:
Post a Comment