Easy Reindeer for kids to paint

 Hey happy holidays to all of you!!

This is an easy to make on purpose so you can make a dozen.  The idea is to give these to kids to paint and this might keep them busy for a little while.  Its best with a small group so it doesn't get out of control.

I used Proxxon tools to make these and I admit it was fun for me too.  Some of the kids enjoyed watching the process and having me change a few things so there's was a little different.  It's easy to personalize this little reindeer.  

For a little nicer reindeer if you are aiming for pretty instead of fun look at the last blog before this for step-by-step directions.  

Equipment and supplies.   Thin Plywood, short pieces of 1 x 3 board, pencil, Proxxon mini scroll saw, Plaid paints glue, clamps.   Add a few kids and this is going to be fun!

1-Firstly, draw your easy design onto your plywood piece.  

Make 2 of these per reindeer

\

Cut these out using the Proxxon mini scroll saw.

\

Use a little wood glue and glue the two pieces together and clamp then till dry.

Using the Proxxon mini table saw set the fence about 1" from the sawblade and set the saw blade at about 1/4" high.  You will run the short piece of 1 x 3 across the saw blade.  (You must remove the blade guard to do this), This will make a groove that the reindeer feet will sit in so it will stand upright.

Get the kids and let them paint their new little project.  Use Plaid paints for good coverage.

Add a little bling bling if desired and your done,

The kids had a blast. and I think they came out cute.  Wish I had a picture before they took them home.

Merry Christmas everyone.  I'll be seeing you in the new year.  

Play safe!

Carol W