Showing posts with label brass. Show all posts
Showing posts with label brass. Show all posts

Tuesday, March 1, 2016

~Boho Vibe ~ New Design Team Post for Proxxon by Sherri Welser

~Boho Vibe ~


Bohemian Style Drop Earrings

I love creating Vintage Bohemian jewelry pieces by creating texture , depth and interest. It is so fun to look at a piece and have to look hard to see it all!That's what I love about creating and incorporating different elements in the item I am creating! Here I have used the Proxxon Drill Press TBM115 to create the drilled holes in the top of the metal guitar pick. It is always wonderful to have the correct the tools to complete a job with ease and accuracy!
Below I have included the supply list and short tutorial on creating these lovelies!Enjoy!

~Supplies~

2  blank brass plated guitar picks (1" in length)
2 bohemian style drop brass earring blanks
10 crystal drops ( I used a vintage piece of jewelry to take apart the crystal drops)
10 -4mm brass jump rings
2 -5mm brass jump rings
2- brass earring hooks
Vintaj Big Kick
Embossing folder ( any of Sizzix embossing folders will work well)


 1) Start by using a black pen and measuring where you want the holes and mark it.
2) Drill holes using a 1mm drill bit  in the tops where you have marked.

 3)Using the Embossing folder and Vintaj Big Kick Embosser, put your guitar picks in the folder placing where you want the  embossed design to be.


 4) Here you can see the embossed design

 5) If using a vintage piece of jewelry for your piece, open the jump rings and take the crystals off. I then saved the jump rings to attach to the new piece. Open jump rings to the side to prevent over stretching them and creating an easy seem to close up when finished.

6) Using the 2- 5mm jump rings attach the guitar pick to the earring base.
 7) Open the loop on the earring hook part at the base and attach the earring to the earring hook, close.


And here is your beautiful pair of Boho Vibe Earrings!
Enjoy!
~In Love & Light~
Sherri

Tuesday, February 16, 2016

~"Vintage Days" Dragonfly Earrings~ NEW Proxxon DT Project!!

~Vintage  Days Dragonfly Earrings~


Creating vintage style jewelry is another love of mine and so when I received my Proxxon Drill Press I was ready to get all my supplies and get going!

~Supplies~

Vintaj Big Kick Embosser
Vintaj-Sizzix Die ( Dragonfly Pond)
Metal blank ( Brass or copper) disks 
Brass or copper jump rings (  4 3-4 mm)
Fine grit sandpaper
Fancy earwires
Bead dangles ( you can use old jewelry too)


Drill  a hole on each end of the metal blank.I use a piece of masking tape to line up the spots for drilling the holes.



 Using the Vintaj BigKick and sizzix die, emboss each of your metal blanks


  Roughly sand the blanks to distress and bring out the embossing on the disks.
 Gather your supplies and using the jump rings attach the earring wires and the bead dangles to the disks on either ends.



You know have created a beautiful Vintage Style distressed pair of unique earrings using  the Proxxon Drill Press!!
~In Love & Light~
Sherri