Showing posts with label scrap lumber. Show all posts
Showing posts with label scrap lumber. Show all posts

Sunday, September 2, 2018

How to Make a Halloween Cat from Lumber Scraps

It will soon be time for witches, pumpkins, and black cats. Halloween is right around the corner, and I've got an easy decorative project that you can make from scraps. Isn't this Halloween cat fun??!!

I used ½" birch plywood for my cat body and ¼" birch plywood for the tail.

Instructions for the Halloween Cat

  1. Start by measuring and marking the width and height of the cat and the depth of the ears. This can vary depending upon the size of your scrap lumber and you desired finished size of the cat. My cat measures 7" high and 2¼" wide. For the ears I marked a point in the center of the width and 2½" from the top. Then, I marked diagonal lines from the top corners to the marked point.
  2. Cut the shapes on the Proxxon MICRO Bandsaw MBS/E.
  3. Save the triangle from the ears. It will make a great Christmas tree!!
  4. Sand any rough edges on the Proxxon Disc Sander TSG 250/E.
  5. Paint the pieces with black FolkArt Chalkboard Multi-Surface paint.
  6. When the paint is dry, distress the edges with 150 grit sandpaper.
  7. Glue the tail to the back of the cat. Glue googly eyes in place, and finish with a raffia ribbon bow.
A note about my cat's tail: It was a scrap the was already cut that I retrieved from a trash bind at a local makers' space. But it could easily be cut on a scroll saw, so I've included a pattern for the tail.
Carole