How to Make a Statement Piece of Jewelry

This piece of jewelry really does make a statement—as it should. Any statement piece is easy to identity because it is chunky, unique, and attention-grabbing. This statement necklace is meant to be the defining piece of your outfit. It will set you apart from the crowd.

Supplies for Making the Statement Necklace

• 2" x 10" x ¼" piece of MDF
• Four gold tone focal beads
• Eight 6mm glass beads in a color to coordinate with you choice of napkin
• Twelve 3mm to 4 mm glass beads in a color to coordinate with you choice of napkin
• 12" to 15" 24 gauge brass jewelry wire
• 14" to 20" gold tone jewelry chain (depending upon the length of your finished piece)
• One jewelry clasp with jump rings
• Gesso
• Mod Podge
• Napkin with design of your choice 
• Classic Gold Liquid Leaf by Plaid Enterprises
• Pattern for kite-shaped pieces

Equipment for Making the Statement Necklace

• Proxxon Bandsaw MBS/E, Proxxon Table Saw FET, or Proxxon Scroll Saw DSH/E
• Proxxon Disc Sander TSG 250/E
• Professional Rotary Tool IBS/E, Drill Stand MB 200 and Machine Vice MS 4

Instructions for Making the Statement Necklace

1. Prepare and mount the pattern on the 2" x 10" piece of MDF. To apply the pattern to the MDF, cover the MDF with painter's tape, spray the reverse side of the pattern with adhesive spray, and adhere the pattern on top of the painter's tape. The painter's tape allows for easy removal of the pattern. 
   
2. Cut the necklace pieces using either the band saw, table saw, or scroll saw.
   
3. Sand the edges of the pieces on the disc sander.
   
4. Measure and mark ¼" from the tip of the piece and half the width of the piece for drilling the hole to attach the piece to the necklace.
   
5. Mount the marked piece in the machine vise and attach to the drill stand.
   
6. Drill a hole for attaching the piece to the necklace.
   
7. Repeat Steps 4 through 6 for each piece.
8. Coat all pieces with gesso.
   
9. Using Mod Podge and a napkin with a design of your choice, napkin collage the front of each piece.
10. When the Mod Podge is dry, paint the edges and reverse side of each piece with Classic Gold Liquid Leaf.
11. String MDF necklace pieces, focal beads, and glass beads on jewelry wire, and form a closed loop at each end of the wire.
12. Attach 7" to 10" of jewelry chain to each end of the wire.
13. Attach jewelry clasp to the ends of the chain.
14. Wear your statement necklace, and enjoy all the compliments that you'll receive.