How to Make a Sliding Book End

This sliding book end project to as easy as it is useful. It's a great beginner project for learning more about Proxxon tools.

Supplies and Equipment for the Sliding Book End

• Piece of ¾" Baltic birch plywood, MDF, or hard wood
• Sliding Book End Schematic
• Proxxon MICRO Bandsaw MBS/E
• Proxxon Scroll Saw DS 460
• Proxxon Table Saw FET
• Proxxon Disc Sander TSG 250/E
• Proxxon Delta Sander OZI/E

Instructions for the Sliding Book End

1. Determine the size of your finished book end. Mine measures 6" x 6". Cut your board to size on the table saw.
   
2. Transfer measurement from the schematic to the board.
   
3. Cut the slot using either the bandsaw or scroll saw.
   
4. Use a quarter to make the rounded corners.
   
   
   
5. Use the disc sander to round the corners.
   
6. Sand all surfaces with the Delta sander.
   
7. Paint and finish the book end with your choice of finishes. I used FolkArt Ultra Dye.
   
8. You can decorate and embellish the book end, or leave as is. I added a book band book mark.
   

Carole